nanaxlit.blogg.se - Epson workforce pro wf-3730

Epson workforce pro wf 3730 for mac#
Epson workforce pro wf 3730 install#
Epson workforce pro wf 3730 drivers#

Actual print times will vary based on system configuration, software, and page complexity. Black - 1100 pages, Composite Colour - 950 pagesġBlack and colour print/copy speeds are measured in accordance with ISO/IEC 24734. Black - 350 pages, Composite Colour - 300 pagesĪpprox. Optional Additional 2 Year CoverPlus Service Packħ02 Black, 702 Cyan, 702 Magenta, 702 Yellowħ02XL Black, 702XL Cyan, 702XL Magenta, 702XL YellowĪpprox.

Epson workforce pro wf 3730 for mac#

*All software for MAC not on CD, downloadable from Tech Epson Online Guide (administrator guide not bundled) High–Speed USB - Compatible with the USB 2.0 Specification.Įpson Connect (Email Print - scan to cloud, remote print + Epson iPrint)

*According to ISO7779 Pattern with Plain Paper

Epson workforce pro wf 3730 drivers#

* Drivers if available are downloadable from Tech EpsonĪpprox. Standard (8pels/mm x 3.85lines/mm), Fine (8pels/mm x 7.7lines/mm), Super Fine (8pels/mm x 15.4lines/mm), Ultra Fine (16pels/mm x 15.4lines/mm), Photo (8pels/mm x 7.7lines/mm)įine (200x200), Photo (200x200 with error diffusion)ĬCITU/ITU Group3 fax with Error Correction Modeģ5 pages (80g/m2) or 3.85 mm (Legal, Letter,A4) Always store ink cartridges with the label facing up do not store cartridges upside-down.Input 48bits (16bits/colour) / output 24bits (8bits/colour)ġ0 x 15cm(4 x 6in), 13 x 18cm(5 x 7in), A5, 8 x 10in, Letter, A4, Legal, #10,C6 1 The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area.

If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge. If you see an error screen telling you an ink cartridge is installed incorrectly, lift up the scanner unit and press the ink cartridge down until it clicks into place. Never turn off the product while the power light is flashing or you will waste ink. When you see a confirmation message on the screen, ink charging is finished. The print head moves to its home position and the printer starts charging the ink. Lower the scanner unit, and select Completed on the LCD screen if necessary.Insert the new cartridge into the holder and push it down until it clicks into place.Remove the yellow tape from the cartridge.ĭo not remove any other labels or seals, or ink will leak.

Epson workforce pro wf 3730 install#

Install the new cartridge immediately after removing the old one if you do not, the print head may dry out and be unable to print.

Before opening the new cartridge package, shake it gently four or five times.ĭo not shake the cartridges after opening the packages, or ink may leak.ĭo not touch the green chip on the cartridge.

Keep ink cartridges out of the reach of children. If ink gets into your mouth, spit it out and see a doctor right away. If ink gets into your eyes, flush them immediately with water. Warning: If ink gets on your skin, wash it thoroughly with soap and water.

Do not take the used cartridge apart or try to refill it. Note: Dispose of used cartridges carefully.

Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.

Do not touch the flat white cable inside the printer.

Lift up the scanner unit until it clicks.ĭo not move the print head by hand otherwise, you may damage your product.

If you are replacing a cartridge before you see a message on the LCD screen, press the home button if necessary, and select Maintenance > Ink Cartridge(s) Replacement > Next > Start.

Note which cartridges need to be replaced and select To cancel errors > Yes, replace now.

If an ink cartridge is expended, you see a message on the LCD screen.

Cartridges are vacuum packed to maintain reliability. Do not open ink cartridge packages until you are ready to install the ink. Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out. You must install new cartridges immediately after removing the old ones. Make sure you have your replacement cartridges handy before you begin.